/Veined Textured Mix Porcelain Range

Veined Textured Mix Porcelain Range

From £64.00 /m² + VAT

An intriguing porcelain that mimics the look of beautiful classic Italian marble with a modern twist of varying textured surfaces.

Additional Information

These are available in small or large rectangles, in a mix of the six finishes. Tiles can be laid stacked, herringbone, random broken bonded and even mix the colours.

Please note: Cut samples not available, whole tile purchases only, please contact us if samples are required.

All products within the Veined Textured Mix Porcelain range are rectified Porcelain tiles.

Lead time 2 to 3 weeks.

We recommend when ordering to include 10-15% for wastage and cuts.

Non-rectified and rectified

Non-rectified porcelain or ceramic tiles are cut to size prior to the firing process. The firing process then causes a degree of shrinkage and warping. These tiles are graded after firing but do not undergo any additional cutting. Because of this, greater variation in size (usually a matter of 1-2mm difference) between tiles should be expected compared with a rectified tile.Rectified tiles are cut to size after the firing process and so are much more precisely sized and have perfect 90 degree corners.When designing the tile layout consideration should be given as to whether tiles are rectified or non-rectified as this will have an influence on joint width and pattern.

Technical Information

Suitable for internal walls & ceilings (including wet areas)
Suitable for internal floors
Suitable for use with underfloor heating
Suitable for external use
Country of OriginItaly
Slip RatingR9
Surface TextureVarious*
Straight Edge Finish
Suitable for light-traffic areas e.g. Residential
Suitable for medium-traffic areas e.g. Residential & Commercial
Suitable for high-traffic areas e.g. Residential & Commercial*

*Mix of gloss, brushed, matt & flamed

Porcelain & Ceramic Fitting Guidelines

For information about preparation and installation of our porcelain and ceramic flooring, see our Porcelain and Ceramic Fitting Guidelines.

Finishing Touches

We supply an extensive range of standard and customised finishing touches for your floor, including transitions and floor protection. For information, see Finishing Touches.

Maintain your Floor

For information on how to care for your floor, see Maintain your Floor.

By continuing to browse or use this site, I agree that Strathearn may use cookies and similar technologies to improve its products and services, serve me relevant content and to personalise my experience. Learn more OK