An innovative new porcelain which cleverly replicates our Versailles Tumbled Limestone, one of our most popular limestone tiles. With the variation of its natural stone counterpart, and available in a convenient 10mm thickness and external 20mm thickness, we are sure this will be a very popular choice!
Toulouse Porcelain
From £44.50 + VAT /m²
- Additional Information
- Technical Information
- Porcelain, Ceramic & Encaustic Fitting Guidelines
- Finishing Touches
- Maintain your Floor
Additional Information
Lead time 2 to 3 weeks approximately.
We recommend when ordering to include 10-15% for wastage and cuts.
Toulouse Porcelain is a rectified Porcelain tile.
Non-rectified and rectified
Non-rectified porcelain or ceramic tiles are cut to size prior to the firing process. The firing process then causes a degree of shrinkage and warping. These tiles are graded after firing but do not undergo any additional cutting. Because of this, greater variation in size (usually a matter of 1-2mm difference) between tiles should be expected compared with a rectified tile. Rectified tiles are cut to size after the firing process and so are much more precisely sized and have perfect 90 degree corners. When designing the tile layout consideration should be given as to whether tiles are rectified or non-rectified as this will have an influence on joint width and pattern.
Technical Information
| Suitable for internal walls & ceilings (including wet areas) | |
| Suitable for internal floors | |
| Suitable for use with underfloor heating | |
| Suitable for external use | * |
| Country of origin | Italy |
| Surface Texture | Smooth |
| Slip Rating | **R10/R11 |
| Straight Edge Finish | |
| Suitable for light-traffic areas e.g. Residential | |
| Suitable for medium-traffic areas e.g. Residential & Commercial | |
| Suitable for high-traffic areas e.g. Residential & Commercial |
*Toulouse Porcelain is available as an external tile, with a 20mm thickness.
**R10 – slip rating for internal thickness (10mm). R11 – slip rating for external thickness (20mm)
Porcelain, Ceramic & Encaustic Fitting Guidelines
For information about preparation and installation of our porcelain, ceramic and encaustic tiles, see our Porcelain, Ceramic & Encaustic Fitting Guidelines.
Finishing Touches
We supply an extensive range of standard and customised finishing touches for your floor, including transitions and floor protection. For information, see Finishing Touches.
Maintain your Floor
For information on how to care for your floor, see Maintain your Floor.
