A lovely range of glazed wall tiles in a versatile range of shades.
Please note: We are unable to provide cut samples for this tile, whole tile purchases only. Please contact us if samples are required.
Shino Dove Gloss Ceramic
From £45.00 /m² + VAT
- Additional Information
- Technical Information
- Porcelain, Ceramic & Encaustic Fitting Guidelines
- Finishing Touches
- Maintain your Floor
Additional Information
Shino Dove is for wall use only and consists of non-rectified ceramic tiles
Lead time 2 to 3 weeks.
We recommend when ordering to include 10-15% for wastage and cuts.
Non-rectified and rectified
Non-rectified porcelain or ceramic tiles are cut to size prior to the firing process. The firing process then causes a degree of shrinkage and warping. These tiles are graded after firing but do not undergo any additional cutting. Because of this, greater variation in size (usually a matter of 1-2mm difference) between tiles should be expected compared with a rectified tile. Rectified tiles are cut to size after the firing process and so are much more precisely sized and have perfect 90 degree corners. When designing the tile layout consideration should be given as to whether tiles are rectified or non-rectified as this will have an influence on joint width and pattern.
Technical Information
| Suitable for internal walls & ceilings (including wet areas) | |
| Suitable for internal floors | |
| Suitable for external use | |
| Country of Origin | Spain |
| Surface Texture | Textured |
| Straight Edge Finish | |
| Suitable for light-traffic areas e.g. Residential | |
| Suitable for medium-traffic areas e.g. Residential & Commercial | |
| Suitable for high-traffic areas e.g. Residential & Commercial |
Porcelain, Ceramic & Encaustic Fitting Guidelines
For information about preparation and installation of our porcelain, ceramic and encaustic tiles, see our Porcelain, Ceramic & Encaustic Fitting Guidelines.
Finishing Touches
We supply an extensive range of standard and customised finishing touches for your floor, including transitions and floor protection. For information, see Finishing Touches.
Maintain your Floor
For information on how to care for your floor, see Maintain your Floor.
