COVID-19 Update - New Showroom Opening Times
/Fern Sage Encaustic

Fern Sage Encaustic

£275.00 /m² + VAT

The Fern range offers something a bit special – both with its funky design and the four colour options available. A durable and versatile tile, which can be used both on the floor and wall.

Additional Information

Please note: Cut samples not available, whole tile purchases only, please contact us if samples are required.

All products within the Fern range are non-rectified encaustic tiles.

Lead time 2 to 3 weeks.

We recommend when ordering to include 10-15% for wastage and cuts.

Non-rectified and rectified

Non-rectified porcelain, ceramic or encaustic tiles are cut to size prior to the firing process. The firing process then causes a degree of shrinkage and warping. These tiles are graded after firing but do not undergo any additional cutting. Because of this, greater variation in size (usually a matter of 1-2mm difference) between tiles should be expected compared with a rectified tile. Rectified tiles are cut to size after the firing process and so are much more precisely sized and have perfect 90 degree corners. When designing the tile layout consideration should be given as to whether tiles are rectified or non-rectified as this will have an influence on joint width and pattern.

 

Technical Information

Suitable for internal walls (including wet areas)
Suitable for internal floors
Suitable for use with underfloor heating
Suitable for external use
Country of OriginItaly
Slip Rating (PSV)Dry 63 Wet 39
Surface TextureSmooth
Straight Edge Finish
Suitable for light-traffic areas e.g. Residential
Suitable for medium-traffic areas e.g. Residential & Commercial
Suitable for high-traffic areas e.g. Residential & Commercial

Porcelain, Ceramic & Encaustic Fitting Guidelines

For information about preparation and installation of our porcelain, ceramic and encaustic tiles, see our Porcelain, Ceramic & Encaustic Fitting Guidelines.

Finishing Touches

We supply an extensive range of standard and customised finishing touches for your floor, including transitions and floor protection. For information, see Finishing Touches.

Maintain your Floor

For information on how to care for your floor, see Maintain your Floor.

By continuing to browse or use this site, I agree that Strathearn may use cookies and similar technologies to improve its products and services, serve me relevant content and to personalise my experience. Learn more OK