A delicate range of florals and geometric designs with stylish and subtle colours and an embossed surface texture.
Broderie Porcelain Range
From £125.00 /m² + VAT
- Additional Information
- Technical Information
- Porcelain, Ceramic & Encaustic Fitting Guidelines
- Finishing Touches
- Maintain your Floor
Broderie 200x200mm are sold in sets of 9 No. (0.36m²). Due to the nature of these tiles, we are not able to guarantee that all designs will be in each set of nine 200x200mm tiles. Always discuss your design expectations with your tiler prior to fitting to ensure you achieve the look you want.
Please note: Cut samples not available, whole tile purchases only, please contact us if samples are required.
All products within the Broderie range are rectified Porcelain tiles.
Lead time 2 to 3 weeks
We recommend when ordering to include 10-15% for wastage and cuts
Non-rectified and rectified
Non-rectified porcelain or ceramic tiles are cut to size prior to the firing process. The firing process then causes a degree of shrinkage and warping. These tiles are graded after firing but do not undergo any additional cutting. Because of this, greater variation in size (usually a matter of 1-2mm difference) between tiles should be expected compared with a rectified tile.Rectified tiles are cut to size after the firing process and so are much more precisely sized and have perfect 90 degree corners.When designing the tile layout consideration should be given as to whether tiles are rectified or non-rectified as this will have an influence on joint width and pattern.
|Suitable for internal walls & ceilings (including wet areas)|
|Suitable for internal floors|
|Suitable for use with underfloor heating|
|Suitable for external use|
|Country of Origin||Italy|
|Surface Texture||Hand-finished Textured|
|Straight Edge Finish|
|Suitable for light-traffic areas e.g. Residential|
|Suitable for medium-traffic areas e.g. Residential & Commercial|
|Suitable for high-traffic areas e.g. Residential & Commercial|
Porcelain, Ceramic & Encaustic Fitting Guidelines
For information about preparation and installation of our porcelain, ceramic and encaustic tiles, see our Porcelain, Ceramic & Encaustic Fitting Guidelines.
We supply an extensive range of standard and customised finishing touches for your floor, including transitions and floor protection. For information, see Finishing Touches.
Maintain your Floor
For information on how to care for your floor, see Maintain your Floor.