window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments);} gtag('js', new Date()); gtag('config', 'G-33MBQVGJDD');

Athena Taupe Porcelain

£67.00 + VAT /m²

Athena Porcelain is one of our most clever limestone look-a-likes – the tiles have a pillowed edge effect which mimics an aged limestone flagstone floor. Available in three colourways, and the versatile flagstone size of 900x600x10mm. We love, love, love this porcelain tile!

Request a Quote

Additional Information

Please note: These tiles are sold by the pack. There are 2 tiles in each pack equal to 1.08m2.

Slight shade and dimensional variation should be expected between both batches and sizes of porcelain tiles. Because of this, care should be taken if wishing to mix sizes and it should be ensured that sufficient materials are ordered for your requirement in one batch. We recommend when ordering to include 10-15% for wastage and cuts.

Due to the nature of porcelain tiles and the way that they are produced, a degree of variation in dimensions should be expected. Whilst this is minimal, it can become more noticeable on larger format tiles. In order to avoid emphasising this, joints should be staggered by a maximum of 30% of the length.

All products within the Athena range are rectified porcelain tiles.

Lead time 2 to 3 weeks

When ordering include 10-15% for wastage and cuts

Non-rectified and rectified

Non-rectified porcelain or ceramic tiles are cut to size prior to the firing process. The firing process then causes a degree of shrinkage and warping. These tiles are graded after firing but do not undergo any additional cutting. Because of this, greater variation in size (usually a matter of 1-2mm difference) between tiles should be expected compared with a rectified tile.
Rectified tiles are cut to size after the firing process and so are much more precisely sized and have perfect 90 degree corners.
When designing the tile layout consideration should be given as to whether tiles are rectified or non-rectified as this will have an influence on joint width and pattern.

Technical Information

Suitable for internal walls & ceilings (including wet areas)
Suitable for internal floors (including wet areas)
Suitable for use with underfloor heating
Suitable for external use
Country of originItaly
Surface TextureNatural
Slip RatingR10
Straight Edge Finish
Suitable for light-traffic areas e.g. Residential
Suitable for medium-traffic areas e.g. Residential & Commercial
Suitable for high-traffic areas e.g. Residential & Commercial

Porcelain & Ceramic Fitting Guidelines

For information about preparation and installation of our porcelain and ceramic tiles, see our Porcelain & Ceramic Fitting Guidelines.

Finishing Touches

We supply an extensive range of standard and customised finishing touches for your floor, including transitions and floor protection. For information, see Finishing Touches.

Maintain your Floor

For information on how to care for your floor, see Maintain your Floor.

Go to Top